14-48 INCH A-2361 RWGV MJXMJ

14-48 INCH A-2361 RWGV MJXMJ

Catalog numbers:

  • A-2361-20 Mechanical joint ends (with accessories unassembled)
  • A-2361-23 Mechanical joint ends (less accessories)

Specifications:

  • Sizes – 14", 16", 18", 20", 24", 30", 36", 42", 48"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed (thru 24”), FM 1120/1130 Approved (thru 16”), and certified to ANSI/NSF 61 & 372 
  • Mechanical joint end complies with ANSI/AWWA C111 Standard.
  • Ductile Iron body and bonnet with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces; 42" and 48" valves coated with HP Epoxy coating.
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
  • Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut (optional bevel or spur gearing) – open left or open right. 30"-48" require a Spur Gear or Bevel Gear
  • 250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3400 kPa/34 barg) static test pressure
  • 14" and 16" sizes – UL Listed, FM Approved: 250 psig (1725 kPa/17 barg)
  • 18", 20" and 24" sizes – UL Listed: 175 psig (1200 kPa/12 barg); FM Approved: 250 psig (1725 kPa/17 barg)
  • Designed for potable water applications

Options*:

  • Position indicators
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem: 14”-16”, ASTM B763-C99500: 18”- 48”
  • Bypass 16" - 48" (2" on 16"-20"; 2.5" on 24"; 3" on 30"- 36", 4" on 42"-48")
  • EPDM Disc and O-rings, 14”-16” optional, 18”-48” standard
  • Handwheel
  • Stainless Steel Stem Type 304, Type 316
  • Spur or bevel geared actuator

Resources:


Full Line Catalog