3-12 INCH A-2362 RWGV Class 250 FLXFL

3-12 INCH A-2362 RWGV Class 250 FLXFL

Mueller® 3-12 INCH A-2362 RWGV Class 250 FLXFL

Catalog number: A-2362-12 Class 250 flanged ends

Specifications:

  • Sizes – 3", 4", 6", 8", 10", 12"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
  • Flanged end drilling complies with ASME/ANSI B16.1 Class 250
  • Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut – open left or open right 
  • 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
  • UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
  • Designed for potable water applications
† Approved for backflow prevention devices by USC (for 4" - 10" sizes)

Options:*

  • Position Indicators
  • Stainless steel stem: Type 304, Type 316
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • 2" square wrench nut
  • P/N 10/16 Drilling
  • EPDM Disc and O-rings

Resources:

 

Full Line Catalog