Pressure Relief Valve_M106-RPS-8700A

Pressure Relief Valve_M106-RPS-8700A

The M106-RPS- 8700A pressure relief valve, which is UL/FM labelled and listed, automatically relieves excess pressure in the fire protection system to discharge. The RPS series valves will also automatically modulate to relieve excess pump capacity during pump start up and shut down, allowing the pump to operate without causing surges. These relief valves are based on the M106-PG or MA106-PG main valves and come in complete range of sizes from 2-1/2 in/65 mm to 8 in/200 mm. In typical pressure relief application, the angle style MA106-RPS- 8700A is often the preferred selection.

Features:

  • UL Listed to ANSI/UL 1478A FM Approved to FM 1361
  • Reliable diaphragm actuated
  • Hydraulically operated design
  • Class 150 and 300 flanges
  • Stainless steel fasteners
  • Heat fused red epoxy coating
  • Available in globe and angle style

Standard materials for pilot system components:

  • ASTM B62 bronze or ASTM B16 brass
  • AISI 303/316 stainless steel trim
  • Buna-N/E for PiplePDM diaphragm and seals

Brochure    Full Line Catalog