2"-8" A-2362 RESILIENT WEDGE GATE VALVES - RAD. x RAD.

2"-8" A-2362 RESILIENT WEDGE GATE VALVES - RAD. x RAD.

Catalog number A-2362-37 radial compression ends

Specifications:

  • Sizes – 2", 2-1/2", 3", 4", 6", 8"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
  • Radial compression ends fit IPS PVC plastic pipe
  • Ductile Iron body with nominal 10 mils MUELLER® Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2” square wrench nut - open left or open right
  • 250 psig (1725 kPa/217 barg) maximum working pressure; 500 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved: 250 psig (1725 kPa/17 barg)
  • Designed for potable water applications

Options:

  • Position indicators
  • ASTM B98-C66100/H02 stem
  • Handwheel

Features:

  • Sizes – 2”, 2-1/2”, 3”, 4”, 6”, 8”
  • Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
  • Radial compression ends fit IPS PVC plastic pipe
  • Ductile Iron body with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2” square wrench nut - open left or open right
  • 250 psig (1725 kPa/217 barg) maximum working pressure; 500 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved: 250 psig (1725 kPa/17 barg)
  • Designed for potable water applications

Full Line Catalog