4-12 INCH I-USP1 TAPPING VALVE MJXFL

4-12 INCH I-USP1 TAPPING VALVE MJXFL

I-USP1-16
I-USP1-19

Specifications:

  • Flanged x Mechanical Joint Ends
  • Indicator Post Style Stuffing box
  • 2" Square Operating Nut
  • With Mechanical Joint accessories+
  • 4", 6", 8", 10" and 12" sizes
  • UL 262 listed and FM 120/1130 approved specifications and certified to ANSI/NSF 61 & 372
  • Ductile iron body and bonnet with nominal 10 mils Mueller® Pro-Gard™ Fusion Bonded Epoxy Coated interior & exterior surfaces
  • Non-rising stem (NRS)
  • Rubber encapsulated iron wedge
  • 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (2758 kPa) static test
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • Epoxy coating meets or exceeds ANSI/AWWA C550 and complies with NSF-61 & 372
  • Flanged end drilling complies with ANSI B16.1 class 125 and B16.42 class 150

Options:

  • Position indicators
  • Stainless steel stem: TYPE 304 and 316
  • EPDM disc and o-rings
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem

Submittal Drawing          Full Line Catalog