14"-48” T-2361 Tapping Valve MJ X FL

14"-48” T-2361 Tapping Valve MJ X FL

Catalog Numbers:

  • T-2361-16: mechanical joint x flanged ends (with mechanical joint unassembled accessories)
  • T-2361-19: mechanical joint x flanged ends (less mechanical joint accessories)

Specifications:

  • Sizes: 14", 16", 18", 20", 24", 30", 36", 42", 48"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
  • Flanged end drilling complies with ASME/ANSI B16.1 Class 125 and with MSS SP-60
  • Mechanical joint end complies with ANSI/AWWA C111 Standard
  • Ductile iron body with nominal 10 mils Mueller Pro-Gard™ Fusion Bonded Epoxy Coated interior and exterior surfaces; 42" and 48" valves coated with HP epoxy
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Ductile iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2" square wrench nut – open left or open right 30"-48" require a Spur Gear or Beval Gear
  • 250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3400 kPa/34 barg) static test pressure
  • 14" and 16" UL Listed: 250 psig (1725 kPa/17 barg); FM Approved 250 psig (1725 kPa/17 barg)
  • 18", 20" and 24" sizes – UL Listed/FM Approved: 175 psig (1200 kPa/12 barg)
  • Designed for potable water applications

Options:

  • Low zinc, silicon bronce ASTM B98-C66100/H02 stem; 14"-16" and ASTM B763-C99500; 18"-48"
  • Bypass 18"-48" (2" on 18"-20"; 2.5" on 24"; 3" on 30"-48")
  • Bypass 3" on 30"-36"; 4" on 42"-48"
  • Position indicators
  • EPDM disc and o-rings (14"-16" option, 18"-48" standard)
  • Spur or Bevel Geared actuator
  • Stainless steel stem: Type 304, Type 316

Resources:

Full Line Catalog