Altitude Control Valve M106-A-TYPE 4
Altitude Control Valve M106-A-TYPE 4
The M106-A- Type 4 altitude control valves are based on the M106-PG main valve, and is ideal for
maintaining a preset maximum water level. The valve functions as a two position control valve, either
fully open or fully closed. The Type 4 allows normal forward flow to fill the storage tank to the maximum
level, then closes drip-tight at the set-point. It opens to refill the tank once the level drops an adjustable
amount below the high water level. Note: Distribution from the storage tank is through a separate
pipeline. This valve does not operate as a check valve to prevent reverse flow.
Features:
- No overflows
- Adjustable draw-down level (differential) set-point
- Superior repeatability
- Positive shut-off
- Adjustable draw-down for improved water cycling
Standard materials for pilot system components:
- Ductile iron
- Brass
- Stainless steel
- Copper