Deluge Valve M106-EPDV-A-10506A

Deluge Valve M106-EPDV-A-10506A

Model M106 EPDV-A- 10506A Pneumatic/Electric Solenoid control valve is based on the Model M106
PGUL Deluge main valve. The solenoid pilot provides on-off position operation. The solenoid, using an
independent air supply, either admits inlet pressure into the main valve operating chamber from the
inlet of the main valve via a high capacity relay valve or releases pressure from the relay valve and
therefore the main valve operating chamber. This either opens or closes the main valve. The pilot
system is usually piped to discharge to drain (atmosphere). The M106 EPDV-A- 10506A is available with
the main valve closed when the solenoid is de-energized (NC-normally closed. This refers to the main
valve, not the solenoid).


  • UL listed for fire extinguishing systems
  • Reliable diaphragm actuated
  • Hydraulically operated design
  • ANSI class 150, 300 flanges and grooved ends
  • Stainless steel fasteners
  • Heat fused red epoxy coating
  • Available in globe style, 3 in/80mm - 8 in/200mm

Standard materials for pilot system components:

  • ASTM B62 bronze or ASTM B16 brass
  • AISI 303/316 stainless steel trim
  • BUNA-N/EPDM diaphragm and seals

Brochure    Full Line Catalog