Mueller Pro-Gard® Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 250μ (10mils) nominal. Meets requirements of AWWA/ANSI C550.
Iron wedge, symmetrical and fully encapsulated with moulded EPDM rubber, no exposed iron.
Polymer cap bearings on wedge guides resist wear and provide easy operation.
Bi-directional flow.
10-year limited warranty.
DN50/2” – DN300/12”: 300psig / 21barg UL / FM WP, 600psig / 42barg TP.
UL 262 listed, FM 1120 / 1130 approved.
Flange End drilling meets ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling. Other connection configurations also available, Groove x Groove; Groove x Flange (DN50/2” – DN300/12”) and Thread x Thread (DN50/2”, DN65/2½” & DN80/3”), please request further details.
