USPVH DN350/14"-DN600/24" R-USP1 PLUS

USPVH DN350/14"-DN600/24" R-USP1 PLUS

Features:

  • Outside Screw & Yoke (OS&Y), Standard-PLUS (+) Gate Valve.
  • 14” – 24”/DN350 – DN600.*
  • Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250μm) minimum. Meets requirements of AWWA/ANSI C550.
  • Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
  • Ductile Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron.
  • Polymer guide cap bearings on wedge guide.
  • Everdur Bronze Stem.
  • 316 Bolts, Nuts and Washers.
  • 10-year limited warranty.
  • 14” & 16”/DN350 & DN400: UL 262 Listed/FM 1120/1130 Approved 250psig/17barg.
  • 18” – 24”/DN450 – DN600: UL 262 Listed 175psig/12barg, FM Approved 250psig/17barg.
  • AWWA C-515 14” – 24”/DN350 – DN600: 250psig/17barg.
  • Flange End drilling meets: ASME/ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face (14” & 16”/DN350 & DN400 optional PN10, PN16 drilling).
  • Fitted with End Covers as standard.

Resources: