USPVH DN50/2" - DN300/12" R-USP1 OS&Y PLUS

Features:

• Outside Screw & Yoke (OS&Y), Standard-PLUS (+) Gate Valve.
• Iron Body, Bonnet, and Yoke.
• Mueller Pro-Gard® 2-Pass Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250 μm) minimum. Meets requirements of AWWA / ANSI C550.
• Meets requirements of AWWA /ANSI C515 and is certified to ANSI / NSF 61 & 372.
• Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron. 
• Polymer cap bearings on wedge guides.
• Everdur Bronze Stem.
• 316 Bolts, Nuts and Washers.
• 10-year limited warranty.
• 2"– 12"/ DN50 – DN300: 350 psig / 24 barg AWWA/ UL /FM WP, 700 psig / 48 barg TP.
• UL 262 listed, FM 1120 / 1130 approved.
• Meets AWWA C515 requirements.
• Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling.
• Fitted with End Covers as standard.

Resources:

• Datasheet