USPVH DN100/4"-DN300/12" P-USP2

USPVH DN100/4"-DN300/12" P-USP2

Features:

  • Non-Rising Stem (NRS), Post Indicator Valve (PIV).
  • Ductile Iron Body, Bonnet and Post Indicator Flange.
  • Mueller Pro-Gard® Fusion Bonded Epoxy Coating inside and out cover all cast surfaces – 10 mils (250 μm) nominal. Meets requirements of AWWA/ ANSI C550.
  • Meets requirements of AWWA/ANSI C509 and is certified to ANSI / NSF 61 & 372.
  • Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
  • Polymer cap bearing on wedge guides resist wear and provide easy operation.
  • Three stem O-rings seal in lubricant – two above thrust collar, one below.
  • Polymer anti-friction washers – one above and one below thrust collar reduce operating torque.
  • 316 Bolts, Nuts and Washers.
  • Bi-directional flow.
  • 10-year limited warranty.
  • Working Pressure: 350 psig / 24 barg; Test Pressure: 700 psig / 48 barg.
  • UL 262 listed; FM 1120 / 1130 approved.
  • Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling. Mechanical Joint also available.

Resources: