USPVH DN350/14"-DN600/24" P-USP1

USPVH DN350/14"-DN600/24" P-USP1

Features:

  • Non-Rising Stem (NRS), Post Indicator Valve (PIV).
  • Ductile Iron Body, Bonnet, and Post Indicator Flange.
  • Mueller Pro-Gard® Fusion Bonded Epoxy Coating inside and out cover all cast surfaces – 10 mils (250μm) nominal. Meets requirements of AWWA/ANSI C550.
  • Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
  • Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
  • Polymer cap bearing on wedge guides resist wear and provide easy operation.
  • NRS – PIV: 14” – 24”/DN350 – DN600.
  • Three stem O-rings seal in lubricant – two above thrust collar, one below.
  • Polymer anti-friction washers – one above and one below thrust collar reduces operating torque.
  • 316 Bolts, Nuts and Washers.
  • Bi-directional flow.
  • 10-year limited warranty.
  • Pressure rating: 14” & 16”/DN350 & DN400 AWWA/UL/FM rating 250psig/17barg; 18” – 24”/DN450 – DN600 AWWA rating 250psig/17barg, UL rating 175psig/12barg, FM Approved rating 250psig/17barg.
  • Flange End drilling meets: ANSI B16.1 Class 125 Flat Face and ANSI B16.42 Class 150 Flat Face. 14” & 16”/DN350& DN400 optional PN10, PN16 drilling. Mechanical Joint also available.

Resources: