Mueller DN50/2" - DN300/12" A-2361 NRS PLUS

Features:

• Non-Rising Stem (NRS), StandardPLUS (+) Gate Valve.
• 2" square Operating Nut (optional Handwheel).
• All Ductile Iron Body and Bonnet.
• Mueller Pro-Gard® 2-Pass Fusion
• Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250 μm) minimum. Meets requirements of AWWA / ANSI C550.
• Meets requirements of AWWA/ANSI C515 and is certified to ANSI / NSF 61 & 372.
• 316 Bolts, Nuts and Washers.
• Antifriction washer above and below thrust collar.
• Ductile Iron Wedge, symmetrical and fully encapsulated with molded EPDM rubber; no exposed iron.
• Silicon Bronze Stem.
• 10-year limited warranty.
• Working Pressure: 350 psig / 24 barg
• Test Pressure: 700 psig / 48 barg.
• 2"/ DN50 – 12"/ DN300, FM 1120/1130 approved.
• 2½"/ DN65 – 12"/ DN300 UL 262 listed, UL does not list 2" NRS valves.
• Flange End drilling meets: ANSI B16.1,
• Class 125 and ANSI B16.42, Class 150
• Flat Face. Optional PN10, PN16 drilling.
• Mechanical Joint also available.
• Fitted with End Covers as standard.

Resources:

• Datasheet