Mueller DN50/2" - DN300/12" A-2361 NRS

Mueller DN50/2" - DN300/12" A-2361 NRS

Features:

  • Non-Rising Stem (NRS).
  • 2" square Operating Nut (optional Handwheel).
  • All Ductile Iron Body and Bonnet.
  • Mueller Pro-Gard® Fusion Bonded Epoxy Coating – 10 mil (250μ) nominal. Meets requirements of AWWA/ANSI C550.
  • Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
  • Antifriction washer above and below thrust collar.
  • 316 Stainless Steel, Bonnet and Stuffing Box Bolts and Nuts.
  • Ductile Iron Wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron – Acetal Caps on guides ease operation and avoid wear.
  • 10-year limited warranty.
  • Working Pressure: 350psig/24barg; Test Pressure: 700psig/48barg.
  • 2"/DN50 – 12"/DN300, FM 1120/1130 Approved.
  • 2½"/DN65 – 12"/DN300 UL 262 Listed, UL does not list 2" NRS valves.
  • Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling. Mechanical Joint also available.

Resources: