3-12 INCH T-USP1 TAPPING VALVE MJXFL

T-USP1-16 mechanical joint x flanged ends (with mechanical joint unassembled accessories)
T-USP1-19 mechanical joint x flanged ends (less mechanical joint accessories)

Sizes - 3", 4", 6", 8", 10", 12"
Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, certified to ANSI/NSF 61 & 372 standard, UL 262 listed, FM 1120/1130 approved
Inlet flange complies with ASME/ANSI B16.1 Class 125 drilling and with MSS SP-60
Mechanical joint outlet complies with ANSI/AWWA C111 Standard
Iron body with nominal 10 mils Fusion Bonded Epoxy Coated interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut (optional handwheel available)--open left or open right
350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
UL Listed/FM Approved 350 psig (2400 kPa/24 barg)
Designed for potable water applications