H-840 SERIES

H-840 SERIES

Catalog numbers:

  • H-840 cut-in sleeve with duck-tipped gasket*
  • H-842 cut-in sleeve with duck-tipped gasket* and bonding set screws in gland
  • H-841 cut-in sleeve with plain rubber gasket*
  • H-843 cut-in sleeve with plain rubber gasket* and bonding set screws in gland

Specifications:

  • Sizes: 4", 6", 8", 10", 12"
  • Cast iron construction
  • Spigot end corresponds to class 150 ductile iron pipe
  • Sleeves are marked with dimensional information to show how much of existing main must be removed for installation of sleeve and valve.
  • 200 psig (1375 kPa/14 barg) maximum working pressure

† See page 12.26 for extra gaskets and classes of pipe that cut-in valve will fit.

Resources: