Nylon Ductile Iron Saddles with Bronze Straps

Nylon Ductile Iron Saddles with Bronze Straps

Mueller® DR1A & DR2A Series Service Saddles

Specifications: 

  • For use on cast iron, ductile iron, steel pipe
  • Outlet tapped with either AWWA taper (C.C.) or AWWA I.P. thread (F.I.P.T.)
  • Single strap design rated at 250 psig (1725 kPa/17.25 bar) maximum working pressure (DR1A); double strap design rated at 500 psig (3450 kPa/34.50 bar) maximum working pressure (DR2A)
  • ASTM A536 ductile iron body
  • Nylon 11 body (10 -12 mil)
  • Forged alloy steel strap
  • Rolled strap threads
  • Nitrile O-ring gasket
  • ½" thru 2" tap sizes
  • Meets all applicable parts of ANSI/AWWA C800
  • NSF 61 Certified

 Certification of Compliance