3-12 INCH T-2361 TAPPING VALVE MJXFL

3-12 INCH T-2361 TAPPING VALVE MJXFL

Catalog numbers:

  • T-2361-16 mechanical joint x flanged ends (with mechanical joint unassembled accessories)
  • T-2361-19 mechanical joint x flanged ends (less mechanical joint accessories)

Specifications:

  • Sizes - 3", 4", 6", 8", 10", 12"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, certified to ANSI/NSF 61 & 372 standard, UL 262 listed, FM 1120/1130 approved
  • Inlet flange complies with ASME/ANSI B16.1 Class 125 drilling and with MSS SP-60
  • Mechanical joint outlet complies with ANSI/AWWA C111 Standard
  • Iron body with nominal 10 mils Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut (optional handwheel available)--open left or open right
  • 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
  • UL Listed/FM Approved 350 psig (2400 kPa/24 barg)
  • Designed for potable water applications

Options:

  • Position indicators
  • Stainless steel stem: type 304 and type 316
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • Handwheel
  • EPDM disc and O-rings

Resources:

  Full Line Catalog