4-12 INCH A-2361 RWGV SLXFL

4-12 INCH A-2361 RWGV SLXFL

Mueller® 350 psi Resilient Wedge A-2361 Gate Valves. Sizes 4"-12".

Catalog numbers:

  • A-2361-41 Slip-on† end (with gasket) x flange end
  • A-2361-43 Slip-on† end (less gasket) x flange end

Specifications:

  • Sizes – 4", 6", 8", 10", 12"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372.
  • Slip-on ends fit plain end of classes 150, 200 and 250 cast iron, ductile iron and classes 150 and 200 cast iron O.D. PVC
  • Flange end drilling complies with ASME/ANSI B16.1 Class 125
  • Iron body with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut – open left or open right
  • 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
  • UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
  • Designed for potable water applications
†Design and dimensions of the joint are manufactured under license of U.S. Pipe and Foundry Company.
††Field Lok is a trademark of U.S. Pipe and Foundry Company, used with permission.

Options*:

  • Position indicators
  • Stainless steel stem: Type 304, Type 316
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • Handwheel
  • EPDM Disc and O-rings

Resources:


Full Line Catalog