14-54 INCH A-2361 RWGV FLXFL

14-54 INCH A-2361 RWGV FLXFL

Catalog number: A-2361-6

Specifications:

  • Flanged ends
  • Sizes – 14", 16", 18", 20", 24", 30",  36", 42", 48", 54"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard (thru 48”), UL 262 Listed (thru 24”), FM 1120/1130 Approved (thru 24”), and certified to NSF/ANSI/CAN 61 and 372
  • Flanged end dimensions and drilling complies with ASME/ANSI B16.1 Class 125
  • Ductile iron body and bonnet with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy coating interior and exterior surfaces; 42" – 54" valves coated with HP Epoxy coating.
  • Epoxy coatings meet or exceed all applicable requirements of ANSI/AWWA C550 Standard.
  • Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
  • Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut (optional bevel or spur gearing) – open left or open right 30" - 54" require a Spur Gear or Bevel Gear
  • 250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3400 kPa/34 barg) static test pressure
  • 14" and 16" sizes – UL Listed, FM Approved: 250 psig (1725 kPa/17 barg)
  • 18", 20" and 24" sizes – UL Listed/FM Approved: 175 psig (1200 kPa/12 barg); FM Approved 250 psig (1725 kPa/17 barg)
  • Designed for potable water applications 

Options*:

  • Stem Options:
    • 14"-16" low zinc, silicon bronze ASTM B98-C66100/H02  
    • 18"-54" low zinc, silicon bronze ASTM B763-C99500 Stainless
    • Stainless Steel Type 304, Type 316
  • Stainless steel fasteners: Type 316
  • Bypass 16"- 54" (2" on 16"-20"; 2.5" on 24"; 3" on 30"- 36", 4" on 42"-54")
  • Spur or bevel geared actuator
  • EPDM Disc and O-rings, 14"-16" optional, 18"-54" standard
  • Position indicators
  • Handwheel

Resources:


Full Line Catalog