4-12 INCH A-2361 RWGV AQUAGRIP® x FL

4-12 INCH A-2361 RWGV AQUAGRIP® x FL

Catalog Numbers:

  • A-2361-76 Aqua-Grip ends x flanged ends for DIPS pipe in sizes 4", 6", 8", 10", 12"
  • A-2361-86 Aqua-Grip ends x flanged ends for IPS pipe in sizes 4", 6", 8"

Specifications:

  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed,
  • FM 1120/1130Approved, and certified to ANSI/NSF 61 & 372
  • Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 125 
  • Ductile iron body and bonnet with nominal 10 mils Mueller Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2” square wrench nut - open left or open right
  • 250 psig (1725 kPa/17 barg) maximum working pressure; 500 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved – 200 psig (1375 kPa/14 barg)
  • Designed for potable water applications

Options:

  • Position indicators
  • Stainless steel stem: Type 304, Type 316
  • EPDM Disc and o-ring
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • Handwheel

Resources:


Full Line Catalog