Mueller DN50/2"-DN300/12" R-2361 PLUS

Mueller DN50/2"-DN300/12" R-2361 PLUS

Features:

  • Outside Screw & Yoke (OS&Y).
  • Standard-PLUS (+) Gate Valve.
  • Iron Body, Bonnet, and Yoke.
  • Mueller Pro-Gard® 2-Pass Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250 μm) minimum. Meets requirements of AWWA / ANSI C550.
  • Meets requirements of AWWA /ANSI C515 and is certified to ANSI / NSF 61 & 372.
  • Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron.
  • Polymer cap bearings on wedge guides.
  • Everdur Bronze Stem.
  • 316 Bolts, Nuts and Washers.
  • 10-year limited warranty.
  • 2"– 12"/ DN50 – DN300:
    • 350 psig / 24 barg AWWA/ UL /FM WP,
    • 700 psig / 48 barg TP.
  • UL 262 listed, FM 1120 / 1130 approved.
  • Meets AWWA C515 requirements.
  • Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150.
  • Flat Face, optional PN10, PN16 drilling.
  • Fitted with End Covers as standard.

Resources: