USPVH DN50/2” – DN300/12” R-USP2

USPVH DN50/2” – DN300/12” R-USP2

Features:

  • Outside Screw & Yoke (OS&Y).
  • Iron Body, Bonnet, and Yoke.
  • Mueller Pro-Gard® Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 250μ (10mils) nominal.  Meets requirements of AWWA/ANSI C550.
  • Iron wedge, symmetrical and fully encapsulated with moulded rubber, no exposed iron.
  • Polymer cap bearings on wedge guides resist wear and provide easy operation.
  • Bi-directional flow.
  • 10-year limited warranty.
  • DN50/2” – DN300/12”: 300psig / 21barg UL / FM WP, 600psig / 42barg TP.
  • UL 262 listed, FM 1120 / 1130 approved.
  • Flange End drilling meets ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling. Other connection configurations also available, Groove x Groove; Groove x Flange (DN50/2” – DN300/12”) and Thread x Thread (DN50/2”, DN65/2½” & DN80/3”), please request further details.

Resources: