Mueller DN350/14" - DN600/24" A-2361 PLUS

Features:

• Non-Rising Stem (NRS), StandardPLUS (+) Gate Valve.
• 2” square Operating Nut (optional Handwheel).
• 14” – 24”/DN350 – DN600. Larger valves through 54”/DN1350 also available.
• All Ductile Iron Body and Bonnet.
• Mueller Pro-Gard® 2-Pass Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250μm) minimum. Meets requirements of AWWA/ANSI C550.
• Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
• Silicon Bronze Stem.
• 316 Bolts, Nuts and Washers.
• Antifriction washer above and below thrust collar.
• Ductile Iron Wedge, symmetrical and fully encapsulated with molded EPDM rubber; no exposed iron.
• 10-year limited warranty.
• Pressure rating: AWWA 250psig/17barg. UL/FM rating: 14” & 16”/DN350 & DN400 250psig/17barg; 18”– 24”/DN450 –DN600 UL rating 175psig/12barg, FM rating 250psig/17barg.
• Flange End drilling meets: ANSI B16.1 Class 125 Flat Face and ANSI B16.42 Class 150 Flat Face. 14” & 16”/DN350 & DN400 optional PN10, PN16 drilling.
• Fitted with End Covers as standard.

Resources:

• Datasheet