USPVH DN50/2" - DN300/12" A-USP1 PLUS

Features:

• Non-Rising Stem (NRS), StandardPLUS (+) Gate Valve.
• 2” square Operating Nut (optional Handwheel).
• All Ductile Iron Body and Bonnet.
• Mueller Pro-Gard® 2-Pass Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250μm) minimum. Meets requirements of AWWA/ANSI C550.
• Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
• 316 Bolts, Nuts and Washers.
• Antifriction washer above and below thrust collar.
• Ductile Iron Wedge, symmetrical and fully encapsulated with molded EPDM rubber; no exposed iron.
• Silicon Bronze Stem.
• 10-year limited warranty.
• Working Pressure: 350psig/24barg; Test Pressure: 700psig/48barg.
• UL 262 Listed, FM 1120/113 Approved.
• Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling. Mechanical Joint also available.
• Fitted with End Covers as standard.

Resources:

• Datasheet