Part Number: 39431


  • For drilling operations under pressure on PVC pipe, 11/16" and 7/8" inclusive
  • Hand operation
  • Drive nut accepts both a standard 3/8" ratchet and a 3/4" socket/box wrench
  • Designed for use on pressurized or dry mains
  • Used to drill through 3/4" and 1" corporation stops and service saddles
  • 7" (178 mm) boring bar travel
  • Two retaining arms on feed sleeve connector retain the boring bar and help prevent line pressure from pushing the boring bar up once the cut is complete
  • Used to cut PVC pipe only
  • 200 psig (1379 kPa) maximum working pressure
  • 150 F (66 C) maximum temperature rating


Operating Instruction Manual

Full Line Catalog