Ductile Iron Saddle with Alloy Straps
Ductile Iron Saddle with Alloy Straps
Mueller® DR1A & DR2A Series Service Saddles
Specifications:
- For use on cast iron, ductile iron, steel pipe
- Outlet tapped with either AWWA taper (C.C.) or AWWA I.P. thread (F.I.P.T.)
- Single strap design rated at 250 psig (1725 kPa/17.25 bar) maximum working pressure (DR1A); double strap design rated at 500 psig (3450 kPa/34.50 bar) maximum working pressure (DR2A)
- ASTM A536 ductile iron body
- Nylon 11 body (10 -12 mil)
- Forged alloy steel strap
- Rolled strap threads
- Nitrile O-ring gasket
- 1/2" thru 2" tap sizes
- Meets all applicable parts of ANSI/AWWA C800
- NSF 61 Certified