14-16 INCH A-2361 RWGV SLXFL

14-16 INCH A-2361 RWGV SLXFL

Catalog numbers:

  • A-2361-41 Slip-on end (with gasket) x flange end
  • A-2361-43 Slip-on end (less gasket) x flange end

Specifications:

  • Sizes – 14”, 16”
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed,
    FM 1120/1130Approved, and certified to ANSI/NSF 61 & 372
  • Slip-on ends fit plain end of classes 50 and 100 cast iron; ductile iron and AWWA C905
    cast iron O.D. PVC
  • Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
  • Ductile iron body and bonnet with nominal 10 mils Mueller Pro-Gard® Fusion Bonded Epoxy
    Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Ductile iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2” square wrench nut - open left or open right
  • 250 psig (1725 kPa/17 barg) maximum working pressure; 500 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved – 250 psig (1725 kPa/17 barg) 
  • Designed for potable water applications

Options*:

  • Position indicators
  • Spur or bevel geared actuato
  • EPDM Disc and O-rings
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • Handwheel
  • Stainless Steel stem: Type 304, Type 316

Resources:


Full Line Catalog