2-12 INCH A-2362 RESILIENT WEDGE GATE VALVES - M.J. X FL.

2-12 INCH A-2362 RESILIENT WEDGE GATE VALVES - M.J. X FL.

Catalog numbers:

  • A-2362-16 mechanical joint x flanged ends (with accessories unassembled)
  • A-2362-19 mechanical joint x flanged ends (less accessories)

Specifications:

  • Sizes – 2”, 3”, 4", 6", 8", 10", 12"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C509 and C515, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 and 372
  • Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
  • Mechanical joint end complies with ANSI/AWWA C111 Standard
  • Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surface
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut – open left or open right
  • 350 psig (1725 kPa/17 barg) maximum working pressure, 700 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved: 350 psig (1725 kPa/17 barg)
  • Designed for potable water applications

Options*:

  • Position indicators
  • Stainless steel stem: Type 304, Type 316
  • EPDM Disc and O-rings
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • Handwheel

Resources:


Full Line Catalog