2-3 INCH A-2362 RWGV - THDXTHD

2-3 INCH A-2362 RWGV - THDXTHD

Catalog number: A-2362-8 threaded ends

Specifications:

  • Sizes – 2", 2-1/2", 3"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
  • Threaded end dimensions comply wiht ANSI B2.1
  • Iron body with nominal 10 mils MUELLER® Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2” square wrench nut - open left or open right
  • 350 psig (1725 kPa/217 barg) maximum working pressure; 700 psig (3450 kPa/35 barg) static test pressure
  • 2-1/2"-3" size - UL Listed, FM Approved: 350 psig (1725 kPa/17barg)
  • Designed for potable water applications

Options:

  • Position indicators
  • ASTM B98-C66100/H02 stem
  • Handwheel

Resources:


Full Line Catalog