14-16 INCH A-2361 RWGV SLXSL

14-16 INCH A-2361 RWGV SLXSL

Catalog numbers:

  • A-2361-38 Slip-on† ends with gasket
  • A-2361-40 Slip-on† ends less gasket

Specifications:

  • Sizes – 14", 16"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
  • Slip-on ends fit plain end of classes 50 and 100 cast iron; ductile iron and AWWA C905 cast iron O.D. PVC
  • Ductile iron body with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coating interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2" square wrench nut - open left or open right
  • 250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved – 250 psig (1725 kPa/17 barg)
  • Designed for potable water application
†Design and dimensions of the joint are manufactured under license of U.S. Pipe and Foundry Company.

Options*:

  • Position indicators
  • Spur or bevel geared actuator
  • Handwheel
  • Stainless Steel stem: Type 304, Type 316
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • EPDM Disc and O-rings

Resources:


Full Line Catalog