3-12 INCH T-2361 TAPPING VALVE MJXFL
3-12 INCH T-2361 TAPPING VALVE MJXFL
Catalog numbers:
- T-2361-16 mechanical joint x flanged ends (with mechanical joint unassembled accessories)
- T-2361-19 mechanical joint x flanged ends (less mechanical joint accessories)
Specifications:
- Sizes - 3", 4", 6", 8", 10", 12"
- Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, certified to ANSI/NSF 61 & 372 standard, UL 262 listed, FM 1120/1130 approved
- Inlet flange complies with ASME/ANSI B16.1 Class 125 drilling and with MSS SP-60
- Mechanical joint outlet complies with ANSI/AWWA C111 Standard
- Iron body with nominal 10 mils Fusion Bonded Epoxy Coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
- Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- 2" square wrench nut (optional handwheel available)--open left or open right
- 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
- UL Listed/FM Approved 350 psig (2400 kPa/24 barg)
- Designed for potable water applications
Options:
- Position indicators
- Stainless steel stem: type 304 and type 316
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- Handwheel
- EPDM disc and O-rings
Resources: